Brand new Evo Performance parts at cheap prices

#1
All brand new and genuine stuff. Can contact me for part no. if available.

CP pistons - 9.0 :1 CR/ evo 1-9 / #SC7200/ floating pins/ pin locks/ Piston rings/ 85-86mm - $1120

CP + Eagle - Standard Package For both/ Evo 1-9/ H beams - $1650

Wiseco + Eagle - Standard Package For both/ Evo 1-9/ H beams - $1650

ARP headstuds - $270

Cometic Head Gasket - $220-$240 Depending on specs

RC injectors - $750-$950 Depending on CC and high/low

Greddy Type R BOV - Part no.: 11501660. comes with BOV, vacuum lines, bolts and washers. Size 47mm - $485

Greddy Type RS BOV - $400

HKS Racing (Type 2) BOV - HKS TYPE 2/ 18psi-28psi/ no flange/ 1421-RA001 - $940

HKS SSQV BOV 2 - HKS SSQV 2/ 7-18PSI/ all necessary parts/ no flange/ 71004-AK001 - $425

Garrett T3/T04E Trim 60 - T3 Flange/ Cold side- .60AR T04E housing, flow: 53lbs/min, 678cfm. Trim 60,57,50 available./ Hot side- .48,.63,.82AR housing/ High flow 76 trim stage 3 wheel/Journal bearing/ oil cooled/ up to 475whp/External wastegated/ 4 bolt rear flange/ front and rear flanges available @ $40/flange - $1390

Garrett T3/60-1 (T3/T4) - T3 Flange/ Cold side- .70AR T04S housing, flow: 61lbs/min, 781cfm. Trim 60/ Hot side- .63AR housing/ High flow 76 trim stage 3 wheel/ oil cooled/360 deg Journal Bearing/ up to 575whp/ 4 bolt rear flange/ External wastegated/ front and rear flanges available @ $40/flange/ Hotside & Trim: others available. pls check - $1560

Garrett GT2871R - T25/28 Flange/ Cold side- .70AR housing, 2.5" or 4" inlet, wheel: 71mm w/ 48 trim/ Hot side- .64/ .86 AR housing, Wheel: 53mm w/ 62 trim/ 5 bolt Hotside flange/ Wastegated/ Flow capacity of 450hp./ Dual ball bearing/ front and rear flanges available @ $40/flange - $2150

Garrett GT2876R - 25/28 Flange/ Cold side- .70AR housing, 2.5" or 4" inlet, wheel: 76mm w/ 48 trim/ Hot side- .64/ .86 AR housing, Wheel: 53mm w/ 62 trim/ 5 bolt Hotside flange/ Wastegated/ Flow capacity of 450hp./ Dual ball bearing/ front and rear flanges available @ $40/flange - $2200

Garrett GT28R - T25/28 Flange/ Cold side- .60AR Housing, wheel: 60mm w/ 60 trim/ Hot side: .64AR housing, wheel: 53mm w/ 62 trim/ 5 bolt hotside/ internal wastegate/ Ball bearing/ 310hp flow capacity - $1850

Garrett GT28RS - T25/28 Flange/ Cold side- .60AR Housing(GT28R or GT28RS housing), wheel: 60mm w/ 62 trim/ Hot side: .63/64/82/86AR housing, wheel: 53.85mm w/ 76 trim/Either(T25 inlet flange 5bolt GT discharge w/built-in internal wastegate/T3 turbine inlet flange 5bolt T3/T4 ford style discharge for internal or external wastegate use)/ Dual Ball bearing/ 350hp flow capacity/ Comparable to HKS GT2530 - $2230

Garrett GT3071R - T3 Flange/ Cold side- .50AR Housing, wheel: 71mm w/ 56 trim, 2"/2.75"/4" Outlet/ Hot side: .63/83/106 AR T3 housing(GT or T3/T4 ford style 5 bolt housing), wheel: 60mm w/ 84 trim/ Dual Ball bearing/ newer model compared to GT3076, spools 1000rpm faster! - $2480

Garrett GT3076R (GT30R) - T3 Flange/ Cold side- .60AR Housing, wheel: 76.2mm w/ 56 trim, 2"/4" Outlet/ Hot side: .63/83/106 AR T3 housing(GT or T3/T4 ford style 5 bolt housing), wheel: 60mm w/ 84 trim/ Dual Ball bearing/ 500hp capacity flow/ comparable to HKS GT3037/ 4 bolt hotside - $2350

Garrett GT3582R (GT35R/40R) - T3 Flange/ Cold side- .70AR T04S Housing, wheel: 82mm w/ 56 trim, 2.5"/4" Outlet/ Hot side: .63/83/106 AR T3 housing, wheel: 68mm w/ 84 trim/ Dual Ball bearing/ 600hp capacity flow/ 4 bolt hotside/ Ported shroud compressor housing +$210 - $2550

ACT Heavy Duty Clutch Evo 8/9 03-06 - Part no.: MB7-HDSS/ HD pressure plate/ Performance Organic Street disk/ Release Bearing/ Alignment tool/ 497ft/lb - $1550

Oil Cooler Kit - oil adaptor/ steel braided lines = 4.4ft long./ 13" x 5.5" x 2"/ 15 rows - $400

Tial WasteGate 38mm - Silver/ 0.6bar spring/ Flange: mild st $22, Stain St $28/ Red,Blu,pur,blk and spring +$15 - $530 (also available in diff sizes 44mm and more.)

Apexi AVCR (black) - $750

Greddy Profec E-01 - $780

Apexi N1 Catback EVO - 2.8"-3.1" piping/ 4.5" tip/ part no.: 161-KM04/ full piece -
$1550

HKS 3037s Kit for Evo 1-9 - Full Kit Come with 1 x NEW HKS GT3037S 56T 0.87 AR Turbo (480HP) 1 x NEW HKS External Wastegage Manifold 1 x NEW HKS External Wastegage/ FUll set Accessorise + Piping - $8150

ATP Garrett 3037 kit for evo also available.

HKS pistons/ Toda flywheel + clutch kit/ Tomei racing cams, valve springs/ Trust Greddy FMIC kit with pipings and a whole load more.
Do email me for any parts you need.

DX-Performance
Email: [email protected]
We will try to match your prices if possible.
 

Similar threads